其實在未搬來渥太華之前，已經意識到現有的 DVD 架開始不夠位，所以幾個星期前已經穿梭於大小傢俬店物色適合的 DVD 櫃，但卻一直找不到理想的。直至月初見 KY 網誌中的模型櫃才靈機一觸。要知心目中理想的 DVD 櫃雖然一直找不到，但理想的模型櫃在搬來渥太華之初已經在宜家 (Ikea) 發現到。自己一直沒有購入這種玻璃櫃是因為現在已有三個櫃放模型，實在沒必要多買櫃放模型。但見 KY 的模型櫃美侖美奐，於是想到何不把現有的一個模型櫃放 DVD，另外買新櫃放模型
當想到後就立即開始行動，首先是把一個模型櫃掏空，故此這兩週家中模型四散(見下兩幅圖)。用舊櫃放 DVD 雖然不是十分理想，但將就一下也不是大問題。只不過現在動畫和非動畫就要分開放(見上圖)，這是沒有辦法的辦法矣。
上個週末因為大風雪的關係，所以拖到昨天才去宜家買櫃。以 CAN$70 (約 HK$560) 來說算很抵玩，但一分錢一分貨，這種玻璃櫃(見下兩幅)未免單薄一點。不過模型櫃幾個月才打開一次，我一個人住家中亦沒有小孩，應該不會有問題。
只不過剛才發現，玻璃面未免太也光滑。一眾模型們，你們要小心滑倒呀！
註：雖然新櫃舊櫃我一律有清洗過，但「洗櫃」者是撈亂櫃的意思啊
病毒是會傳染的……我星期日看完KY的BLOG後，便打算從WS取幾個心水模型回家安放，而無獨有偶，我之前買了的又是和你的一樣，不過香港要990元呢……
回覆刪除你是一個人組裝嗎？我一個人裝弄了成粒鐘，兼出了身泠汗……
[版主回覆03/18/2008 05:10:00]Yes, I assembled them by myself. The first one took 3 hours, the second one in about an hour.
Is it IKEA's?
回覆刪除[版主回覆03/18/2008 05:11:00]Yes, from Ikea.
我都想買番個玻璃櫃．．．．．．．
回覆刪除如果我買你這個ｓｉｚｅ左右的櫃，大約幾錢呢？
[版主回覆03/18/2008 05:13:00]Crabchiu said its HK$990. Mine is 163 X 43 X 37 cm
http://www.ikea.com/ca/en/catalog/products/10011055
揸fit人都叫我去買個櫃, 佢話鐘意Ikea$80幾蚊果個(可能就係呢個都未定), 不過我都未夠成品. 吉吉咁,把鬼咩!
回覆刪除[版主回覆03/18/2008 09:36:00]以你既速度，年尾都已經夠一格一件。不過我認為最好有四件成品先去買，否則有一格比老婆佔據了之後就難以收回失地！
(據 Ikea 講，CA$70 這個價是近期才下調的。)
哈哈哈... 我以前都有一個係加拿大... 但回港後地方太細&老婆唔比(她說買個櫃你又會買多D高達去田佢...) 事實上, 佢無講错
回覆刪除[版主回覆03/19/2008 06:51:00]問題係，唔買櫃咪一樣係咁買高達，所以櫃係無罪嘅！
咁睇得起我呀? 2007全年我都係起到兩隻咁大把.
回覆刪除[版主回覆03/19/2008 06:52:00]咁咪啱數囉，2008 又兩件！
咁樣放真係靚好多! 上方有打燈嗎?
回覆刪除[版主回覆03/19/2008 06:53:00]有打 10W 的細燈，不算熱。
我都有一個類似ge櫃...我個隻門有好大條縫...會有塵走入去...成日都要清潔...你個有無甘ge問題??
回覆刪除[版主回覆03/19/2008 06:54:00]據講這種櫃是容易入塵的。
咁多好o野, 兩個櫃都唔多夠放喎~~
回覆刪除[版主回覆03/19/2008 06:55:00]兩個櫃已經搬餐死了！
好似ball_kei咁講 , 兩個櫃都唔多夠放喎 , $560咁抵買, 買多兩個就更有氣勢啦.
回覆刪除[版主回覆03/19/2008 06:59:00]暫時放住先，下一個 project 要搞屋企上網的電線和 AV 喇叭。再遲下先再諗加櫃。
有時作品多到唔知點處理.....
回覆刪除面對人滿之患.....可以點呢.....
[版主回覆03/19/2008 06:59:00]可以.....入盒！
溫馨提示：玻璃櫃內放一杯水，可以減低燈光溫度，以及吸塵。
回覆刪除[版主回覆03/21/2008 10:45:00]係喎，多謝提醒
有一個櫃放模型簡直係夢想,仲要係玻璃tim,你呢個又幾平喎
回覆刪除[版主回覆03/27/2008 06:07:00]我都留意咗好耐先捨得買的。
First time to leave message here!!! Nice to meet you!!
回覆刪除I'm doing exactly the same way as yours one!! (putting all DVD boxes and comic/fiction on the shelf) And I'm going to buy that IKEA shelf as well!! But I don't think Australia would sell as cheap as yours price!! (The IKEA "BILLY" also ask for AUD$99, about HK$650-700!! )
[版主回覆08/15/2008 20:41:00]Welcome
If my memory serves me right, the glass shelf was over CAD$99. The price was reduced shortly before I bought mine. In other words, AUD$99 might not be unreasonable. On top of that, given the look of the shelve and its practicality, even AUD$99 is not a bad deal at all.
Ha Ha Ha!!! Thx for the information. Actually IKEA at Australia having a "low" selling price on furniture comparing with those local make!!! However................$99 is just normal "Billy" bookshelf, but not the glass shelf.............orz!!! The glass one............ask for AUD $179 http://www.ikea.com/au/en/catalog/products/10119206
回覆刪除[版主回覆08/15/2008 21:02:00]Ouch, it's very pricey
Yes.............I just checked the price at HK..............sale HK $690 http://www.ikea.com.hk/chi/whatnew/08crazy_special.html Comparing with the price at Australia................ HK 12xx............... http://www.ikea.com/au/en/catalog/categories/departments/living_room/10384/ Let see when would sale at here, then I can buy 2!!
回覆刪除[版主回覆08/16/2008 05:23:00]My experience is that paying for the cost of the glass shelf is not the biggest problem. The biggest one is bring one back home! Each one is very heavy, 2 will be impossible for one guy
That's too expensive to buy 2 at the same time. Just my planning.............to get two only!!! BTW, except furniture, the selling price of Gunpla is high at Australia (Syd and Mel) as well!!!
回覆刪除[版主回覆08/16/2008 08:58:00]Put it this way, the price of Gunpla in Hong Kong is unhealthily cheap!
That's true!! But right now I would generally order Gunpla from China directly. As lower transportation cost, and the selling price is similar with HK as well!!!!! BTW, Syd and Mel also 3-4 times higher than HK...........................!!
回覆刪除[版主回覆08/17/2008 11:47:00]I never even think of using those mail order shops from China. I usually ordered my models from Japan directly.
As me and my gf would always ordering stuff from China (anything, including dressing as well!), I would adding order of Gunpla (and tools, paints...........etc) from there at the same time. Comparing the price, sometimes may even cheaper than HK (normal selling price I means). And lot of different types of products available on 1 web. So that can save my time!!! (main issue is............my Japanese not that good, browsing JP web......................not easy to find stuff that I want!!! And going through agent at JP would charge me more..................!!)
回覆刪除[版主回覆08/17/2008 20:42:00]oic